Rockwell Automation 1792-IB8/B INSTL.INST ARMOR BLOCK 8 INPUT User Manual
Page 30
ArmorBlock 8 Input Module
30
Publication 1792-5.2 – October 1996
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param4 =
$ Reset Faulted I/O
0,
$ reserved
6,
$ Link Path Size
”20 0F 24 04 30 01”,
$ Link Path to param instance.
0x0002,
$ No support for settable path, scaling, scaling links,
$ or real time update of value. Value is gettable and
$ Settable. Enumerated strings are supported.
8,
$ Data Type – unsigned short int
1,
$ Data Size – (in bytes)
”Reset Faulted I/O”,
$ Parameter Name
””,
$ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This resets the voltage supplied to sensors. A reset will only be accepted if a fault
exists.”,
0,1,0,
$ Min, Max (max enumeration #), and Default values
1,1,1,0,0,0,0,0,0;
$ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param5 =
$ Input 1 value
0,
$ reserved
6,
$ Link Path Size
”20 08 24 01 30 03”,
$ Link Path to Input 1 value attribute.
0x0030,
$ No support for settable path, scaling, or scaling
$ links.
$ Value is gettable only.
$ Enumerated strings are not supported.
8,
$ Data Type – unsigned short int
1,
$ Data Size – (in bytes)
”Input 1 Value”,
$ Parameter Name
””,
$ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current value of Input 1.”,
0,1,0,
$ Min, Max, and Default values
1,1,1,0,0,0,0,0,0;
$ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param6 =
$ Input 2 value
0,
$ reserved
6,
$ Link Path Size
”20 08 24 02 30 03”,
$ Link Path to Input 2 value attribute.
0x0030,
$ No support for settable path, scaling, or scaling
$ links.
$ Value is gettable only.
$ Enumerated strings are not supported.
8,
$ Data Type – unsigned short int
1,
$ Data Size – (in bytes)
”Input 2 Value”,
$ Parameter Name
””,
$ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current value of Input 2.”,
0,1,0,
$ Min, Max, and Default values
1,1,1,0,0,0,0,0,0;
$ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param7 =
$ Input 3 value