Rockwell Automation 1792-IB8/B INSTL.INST ARMOR BLOCK 8 INPUT - Manual (Page 33)

33 ArmorBlock 8 Input Module
Publication 1792-5.2 – October 1996
$ Value is gettable only.
$ Enumerated strings are supported.
8, $ Data Type – unsigned short int
1, $ Data Size – (in bytes)
”Input Status”, $ Parameter Name
””, $ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current status of the sensor source voltage”,
0,1,0,
$ Min, Max, and Default values
1,1,1,0,0,0,0,0,0; $ Not Used
[Groups]
Group1=”Configuration”,3,1,2,3;
Group2=”I/O”,10,4,5,6,7,8,9,10,11,12,13;
[EnumPar]
Param1=”Enable”,”Disable”;
Param2=”0 ms”,”2 ms”,”4 ms”,”8 ms”,”16 ms”;
Param3=”0 ms”,”2 ms”,”4 ms”,”8 ms”,”16 ms”;
Param4=”Nothing Selected”,”Reset Sensor Source Voltage”;
Param13=”Healthy”,”Faulted”;