Rockwell Automation 6001-F2E AB STANDARD DRIVER SFTW - Manual (Page 11)

Installing the Standard Driver Software
Chapter 2
2-4
Installing the Software
To install the Standard Driver software:
1. Create a working directory in your computer’s hard disk (C:\F2E, for
example). Use this directory to build your application program(s).
2. Put the disk containing the Standard Driver files in disk drive A:>
(We use drive A:> as a default.)
3. Copy all the files from the disk to that directory
(
Copy A:*.* C:\F2E ).
This completes the installation procedure. The next chapter helps you
plan your application program.