Rockwell Automation 6001-F2E AB STANDARD DRIVER SFTW - Manual (Page 54)

Appendix
D
D-1
Error Codes
This appendix contains local and remote error codes:
Table D.A
Local Error Codes
Error Codes (in Hex) Message
1 Successful transmission
18 LLC Interface not initialized; SSAP already used or invalid
SSAP
19 LLC Interface not initialized; KTLLC driver not installed
1A Unsuccessful send request; SSAP not active or illegal
1B Unsuccessful send request; Invalid packet size
1C Unsuccessful send request; Host cannot access dual port
1D Reply timeout; No reply data received
1E Unsuccessful send request; Buffer not available
1F DH-485 Interface not initialized
23 Bad function parameter
25 Invalid Channel
27 KR transmit timeout
28 Fatal solicited buffer memory allocation
29 Fatal timer buffer memory allocation
2A Fatal timer buffer memory corrupted
2B KR channel already open
Error Codes