Rockwell Automation 2755 High Performance VLD Scanner - Manual (Page 33)

4–2 Installing the Scanner
Typically, the only tool you need for installation is the adjustment
tool supplied with the scanner and a screwdriver.
The scanner and decoder are mounted separately. The
scanner-to-decoder cable is 10 feet (3.0 meters) long. The scanner to
package detect cable is approximately 11.5 inches (.29 meters) long.
Extension cables increase the scanner-to-decoder distance to 25 or 50
feet (7.6 or 15.2 meters). Figure 4.1 shows nominal dimensions of
the scanner.
Figure 4.1
Dimensions of Scanner (Nominal)
5.8 in
(147 mm)
4.6 in
(117 mm)
3.1 in
(77 mm)
3.8 in
(97 mm)
Front View Back View
Side View
SCAN 6
POWER VALID
7.0 in
(178 mm)
Recommended Cable Clearance
1.1 in
(27.9 mm)
1.9 in
(48.3 mm)
Angular Tolerance + 1 _
Angular
Tolerance
+1 _
Midpoint
Scan Line
Midpoint of Scan Line
Tools You Need
Determining
Space Requirements