Rockwell Automation 2711 MODBUS COMMUNICATIONS FOR PANELVIEW TERMINALS - Manual (Page 11)

Publication 2711-6.9
Modbus Communications for PanelView Terminals 11
Setting up Communications Setting up Modbus communications for an application includes:
•
selecting a Modbus terminal when creating the application.
•
configuring communication parameters for the terminal on the
Modbus link.
Selecting a Modbus PanelView Terminal
Select a Modbus terminal for a PanelView application from:
•
Create New Application dialog or the
•
Terminal Setup tab of the Application Settings dialog when
converting the application to run in another terminal.
Any catalog number with 14 as the last number (2711-xx14) is a
Modbus terminal.
Indicates RS-232 port is set
for downloading
applications not printing