Verifying correct operation – Rockwell Automation 2708-NNM Network Manager Software User Manual
Page 11
Advertising
![background image](/manuals/580073/11/background.png)
Chapter 2
Connections and Parameters
2–3
From the
Main
Menu press
<F5>/‘R’
to Reset the Network. Then press
<F2>/‘N’
to see the Network
Status.
The column Status should show
workstations coming on–line
or already
on–line. If this is not the case, verify that all the steps in the chapter have
been done correctly.
Verifying Correct Operation
Advertising