Rockwell Automation 2708-NNM Network Manager Software - Manual (Page 27)

Chapter 3
The Menus
3–15
The character following the title in the ‘Entry Name’ is given a more bold
appearance and is the key that invokes the command.
The ‘Entry Function’ is a field that can be toggled by the <SPACE BAR>.
The DOS command name is useful if the command is a system type
command performed at the DOS prompt. A prompt for parameters
can be
added which occurs when the command is activated.
Change Configuration / Site List Editing
Version 5.0 does not have this ability at the present time. It will be added in a
future release.
Change Configuration / Modem Parameters
Parameters
NM is designed to work with a modem and by default has a few standard AT
strings already entered. NM will initialize your modem, dial the number &
hang up the line.
Other parameters vary the time that the modem waits for an answer and the
time that NM will wait for data.
Change Configuration / Save Changes
This command will save your changes to the disk so that the next time you
run NM it will default to these values.
The Main Menus (cont’d)