Rockwell Automation 2708-NNM Network Manager Software - Manual (Page 13)

A–B
3
Chapter
3–1
The Menus
Once NM. EXE is executed, NM will try to communicate with the Master
workstation. If it is unsuccessful, the bottom of the screen will show the retry
count. The <ESC> key can be pressed to bypass the initial communications
thus allowing the Main Menu to be displayed.
The Main Menu should appear on the left half of the screen. It consists of the
most commonly used functions and allows access to the other menus. The
Main Menu should look something like the following.
DH5 Network Manager V5.0
F1 : Help
F2 : Network status
F3 : Global time set
F4 : Program download
F5 : Reset the network
F6 : Command to be sent
F7 : Supervisor Menu
F8 : File services
F9 :
F10 : Exit Program
Mar 04, 1991 07:40:30 am
Main Menu
Network Status
Current Site : NM
Stations Online : 1
Stations Offline : 0
Records Input : 0
Records Output : 0
Network Com Active
If the NM Main Menu appears different than above, it may be because the
version of NM that you are using has been customized for your application.
If this is the case, contact the systems integrator that did the installation for
documentation specific to your application.
The function keys specified or the highlighted letters will initiate the
command or menu desired.
The Main Menus