Rockwell Automation 2711C-xxxx PanelView Component HMI Terminals Installation Instructions - Manual (Page 11)

PanelView Component HMI Terminals 11
Publication 2711C-IN001H-EN-P - July 2014
1. Push the terminal firmly into the cutout on all sides and corners until the plastic bezel contacts the
enclosure and the gasket is fully compressed.
You will hear a series of clicks as the clamps self-adjust to the panel thickness.
IMPORTANT The terminal temperature must be greater than 0 °C (32 °F) during panel installation.
IMPORTANT Do not push on the display when pushing the terminal into the panel or you may damage
the display.
PanelV
iew C600
PanelV iew C600
PanelV iew C600
44870