Rockwell Automation 2711 PanelView 300 Keypad Terminal Installation Instructions - Manual (Page 9)

PanelView 300 Keypad Terminals 9
Publication 2711-IN027C-EN-P - February 2009
Installing the Memory Card Retainer
The memory card retainer is required for UL508 installations where a memory card
is inserted in the card slot. The retainer protects against Electrostatic Discharge
(ESD) up to 15KV and prevents accidental removal of a memory card in high
vibration environments.
To attach the memory card retainer:
1. Secure the base of the retainer over the existing memory card slot using the
two screws provided. Tighten screws to a torque of 0.7…0.9 N•m
(6…8 lb•in).
2. Insert the memory card and install the retainer until it is properly seated.
3. To remove the retainer, press the tabs on each side and pull.
Retainer Base
Memory Card
Retainer
Base Mounting Screws