Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 19)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 17
PowerFlex HMI Interface Board Chapter 2
Figure 10 - Internet Protocol Properties
5. Click the Use the following IP address radio button and enter the IP
address of 169.254.0.11. Enter a Subnet mask of 255.255.0.0.
All other entries can be left blank.
6. Click OK on the two open dialogs, and Close the Local Area Connection
Status window.
Windows 7
1. From the Start menu, choose Control Panel>Network and Sharing
Center.
2. Click Change adapter settings, and double-click Local Area Connection.
3. Click Properties under the General tab to open the Local Area
Connection Properties window (
Figure 9 ).
4. Scroll through the list and select Internet Protocol Version 4 (TCP/IP)
under the General tab.
5. Click Properties to open the Internet Protocol Properties window
(
Figure 10 ).
Click the Use the following IP address radio button and enter the IP
address of 169.254.0.11. Enter a Subnet mask of 255.255.0.0.
All other entries can be left blank.
6. Click OK on the two open dialogs, and Close the Local Area Connection
Status window.