Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 51)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 49
Drive Terminal Application Chapter 4
Create a Custom Group of Parameters
The custom setup ( Figure 47 ) arranges user-definable groups. These groups are
displayed wherever the normal File-Group-Parameter arrangement of predefined
drive groups is displayed. These are typically found during a Select Parameter
operation or on the Display screen.
Since the custom group name could conflict with a predefined drive group, all
custom groups are displayed in the color green in a list. The custom group names
are enclosed using chevrons to further distinguish them.
Figure 47 - Custom Setup
To create a new group:
1. Select “Create Custom Group” from the left panel.
2. Press the ‘Group Name’ column header to open Enter Group Name dialog
(
Figure 48 ).
Figure 48 - Edit Custom Group Name
3. Use the keyboard to change the default name.
4. Pressing enter or the ‘Soft Keypad Icon’ to accept the changes.
A new, but empty group will now be displayed. Adding parameters to this new
group is the same as editing an existing group (see
Assign a Parameter on
page 43 ).