Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 45)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 43
Drive Terminal Application Chapter 4
Assign a Parameter
Numerous Setup screens require the user to select and assign a parameter to a
function using the same method.
1. Select the desired function from the first column.
2. Press the ‘Parameter’ column heading to open the Select Parameter
dialog (
Figure 39 ).
Figure 39 - Select Parameter
3. Select the desired group name.
A list of parameters are presented in the right panel.
4. Select the desired parameter you wish to assign to the current function.
5. Press Select to apply the change.
Pressing the ‘Remove’ button unassigns any parameter from the current function.
Pressing the ‘Cancel’ button aborts the selection process.
TIP Alternatively, after selecting the associated function from the first column, the
‘Search’ button will find the parameter by Parameter number or by Name.
TIP Click Group Name or Parameter header to sort the column based on:
• normal drive arrangement (group numbers)
• alphabetically
• group access level (sort on a secondary alpha key)
Clicking on the Linear header sorts the list based on parameter number.