Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 54)

52 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
Chapter 4 Drive Terminal Application
Diagnostics The PowerFlex 7000 drive can capture parameters on a real-time basis for later
analysis.
The Diagnostics screen, typical of Figure 50 , consists of sub panels used to:
• Configure the diagnostic setup
• Control and provide status of the operation of the data collection.
• View the collected data in tabular format
• View the collected data in a plot
Figure 50 - Diagnostics Screen
Assign a Parameter to a Trace
The data is captured to a number of traces.
To assign a parameter to a trace:
1. Select the desired trace.
2. Select the Parameter column header. See Assign a Parameter on page 43 .
If the parameter number is known:
1. Select the desired trace.
2. Press the Linear column header.
This opens the Soft Keypad. The parameter number can be directly
entered.
Parameters can also be selected for assignment by using the ‘Search’ button.
Parameters are not plotted by default.