Rockwell Automation 2080-LC10-12AWA_12QWB_12QBB_12DWD Micro810 12 Point 24V/12V DC Programmable Controllers - Manual (Page 13)

Micro810 12 Point Programmable Controllers 13
Publication 2080-IN006B-EN-P - April 2014
North American
temp code T5
Insulation
stripping length 7 mm (0.28 in.)
Isolation voltage 250V
(continuous),
Reinforced
Insulation Type,
I/O to Aux and
Network, Inputs
to Outputs.
Type tested for
60 s @
3250V DC, I/O to
Aux and Network,
Inputs to Outputs 250V (continuous), Reinforced
Insulation Type, I/O to Aux and
Network, Inputs to Outputs
Type tested for 60 s @ 720V DC,
Inputs to Aux and Network, 3250V DC
Outputs to Aux and Network, Inputs to
Outputs 50V (continuous),
Reinforced
Insulation Type,
I/O to Aux and
Network, Inputs
to Outputs
Type tested for
60 s @ 720V DC,
I/O to Aux and
Network, Inputs
to Outputs
AC input filter
setting 16 ms for all embedded inputs
Through the Connected Components Workbench software, go to the
Embedded I/O configuration window to re-configure the filter setting for each
input group.
(1)
Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation
Wiring and Grounding Guidelines, publication
1770-4.1 .
Non-isolated AC Inputs (2080-LC10-12AWA)
Attribute Value
On-state voltage, nom 120/240 V AC
On-state voltage, min 79 V AC
On-state voltage, max 265 V AC
Off-state voltage, max 40 V AC
Operating frequency, nom 50/60 Hz
Input impedance 423.7 k Ω
Operating frequency 47…63 Hz
General Specifications
Attribute 2080-LC10
12AWA 12QWB 12DWD 12QBB