Rockwell Automation 2080-LC10-12AWA_12QWB_12QBB_12DWD Micro810 12 Point 24V/12V DC Programmable Controllers - Manual (Page 14)

14 Micro810 12 Point Programmable Controllers
Publication 2080-IN006B-EN-P - April 2014
DC Inputs (2080-LC10-12QWB, 2080-LC10-12QBB, 2080-LC10-12DWD)
Attribute Non-isolated inputs, shared
with analog inputs (Inputs 4...7) Isolated inputs
(Inputs 0...3)
Voltage category 24V DC sink/source
On-state voltage, nom 12/24V DC
On-state voltage, min 9.8V DC
On-state voltage, max 28.8V AC
Off-state voltage, max 5V DC
Off-state current, max 0.5 mA 1.5 mA
On-state current, min 0.75 mA @ 10.8V DC
1.0 mA @ 15 V DC 1.8 mA @ 10.8V DC
2.7 mA @ 15 V DC
On-state current, nom 2.1 mA @ 24V DC 6 mA @ 24V DC
On-state current, max 2.7 mA @ 28.8 V DC 7.5 mA @ 28.8 V DC
Nominal impedance 14.1 k Ω 3.74 k Ω (isolated)
IEC input compatibility Type 1 Type 3
Analog Inputs (2080-LC10-12QWB, 2080-LC10-12QBB, 2080-LC10-12DWD)
(Inputs 4...7)
Attribute Value
Input type DC voltage
Input voltage range 0…10V DC
Input voltage, max 26.4V DC
Value of LSB 10 mV
Input resolution 10-bit
Filtering None (12-bits truncated to 10-bits for smoothing)
Overall accuracy 5% of full-scale (2% with calibration)
(25…55 °C) (77…131 °F)
Noise rejection 50/60 Hz
Common mode
rejection 40 dB, DC to 60 Hz with smoothing filter
Nominal impedance 14.1 k
Ω (non-isolated)