Rockwell Automation 2706-ND1 DL40 OFFLINE PROGRAMMING SFTWR.USER MANUAL - Manual (Page 109)

Chapter 6
The Transfer Menu
6 – 21
Figure 6.16
File Selections pop-up window
Use the arrow keys to move the cursor to the file you want to download to
tape and press
[
↵
] . If the name of the file you want to download does not
appear here, you may be using the wrong data directory. You can change the
data directory by backing up and selecting
Directory on the Write To Tape
menu. When you enter a complete directory path in the Directory pop-up
window the Offline Programming Software will use that directory as a
default for all file activities. You can override the
Directory setting by typing
another complete data directory when naming files. Enter the directory in the
form:
Drive:\Root\Subdir
When you have selected a file, the wording in the Select File field on the
Write To Tape menu will change to the word Write followed by the file name
you have selected. The Writing confirmation pop-up will appear. Select
Yes
to begin, or No or Quit to cancel the download and return to the Select File
menu.