Rockwell Automation 2706-ND1 DL40 OFFLINE PROGRAMMING SFTWR.USER MANUAL - Manual (Page 47)

Chapter 5
The Develop Menu
5 – 2
Special keys
You may use the following special keys on the Develop menu.
↓ ↑
Move the cursor to the desired function
Move the cursor directly to the first menu item ( Select)
Move the cursor directly to the last menu item ( Quit)
↵
Selects the item highlighted by the cursor
Closes the Develop menu and returns cursor to Main menu
Get Online Help
Notes
From the Develop menu you can choose from the following:
•
Select File to modify an existing data file.
•
Create New File to create a new data file.
•
Directory to specify a data path
The Offline Programming Software supports both color and monochrome
monitors. Make sure your monitor type matches the type selected in the
Setup menu. Refer to the previous chapter for instructions on changing your
monitor type.
You cannot Select a file unless that file is located on the current DOS path.
If necessary, use the Directory menu item to change directories. The window
that opens when you pick Develop → Select File shows the current directory
in the upper left.