Rockwell Automation 1395 Digital DC Drive - Manual (Page 14)

Publication 2361-5.01 July 1998
1-2 Product Overview
• programmable functions (independent acceleration/deceleration
adjustment, preset speeds, current limit, tapered current limit,
tach loss recovery, system reset)
• protective features (instantaneous overcurrent, motor overload,
feedback loss, field loss, field economy, tach loss recovery,
system reset)
• CENTERLINE Bulletin 2361 Motor Control Center enclosure
Standard Options The following options are available for the high-horsepower 1395
drives:
• 115V AC discrete adapter board
• 24V DC discrete adapter board
• node adapter board
• multi-communications adapter board
• door-mounted DHT or EHT programming terminal
• ‘start/running’ and ‘clear fault/drive faulted’ door-mounted
illuminated pushbuttons
• ‘drive stop’, ‘hardwired stop’, ‘jog forward’, and ‘jog reverse’
door-mounted pushbuttons
• ‘power on’ door-mounted pilot light
• door-mounted speed potentiometer
• 1-2-3 speed selector
• blower starter (NEMA, IEC)
• 90A single-phase field regulator
• control circuit transformer
• top-hat input enclosure (standard for 3000A drive)
• line RC suppressor
• AC power thru bus
Note: Additional options are listed in Appendix B.