Rockwell Automation 2707-M232P3xX, -M485P3X DTAM Micro Operator Interface Installation Instructions - Manual

DTAM Micro Operator
Interface
(Catalog Nos. 2707-M232P3xX, -M485P3X)
Installation Instructions
This document describes how to install a DTAM Micro terminal and
connect power.
•
Wiring and Safety Guidelines
•
Enclosures
•
Equipment Required
•
Clearances
•
Mounting Dimensions
•
Installation
•
Wire and Cable Length Restrictions
•
Connecting Power
•
Powerup Sequence
•
Upload/Download DIP Switch Settings
•
Upload/Download Connections
•
Connecting to Devices
•
Specifications
•
Agency Ratings
•
European Union Directive Compliance
For more information on the DTAM Micro terminal, refer to the
following publications.
•
DTAM Micro User Manual
2707-803
•
DTAM Micro DeviceNet Operator Interface 2707-803.5
These publications are available for viewing and download from the
Rockwell Automation/Allen-Bradley Website at www.ab.com.