Rockwell Automation 2707-M232P3xX, -M485P3X DTAM Micro Operator Interface Installation Instructions - Manual (Page 9)

DTAM Micro Operator Interface 9
Figure 4
DC Power Connections
Optional AC to DC Adapter
Catalog No. 1747–NP1, -NP2
To 120VAC (Catalog No. 1747-NP1)
To 240VAC (Catalog No. 1747-NP2)
DTAM Micro
Use AWG#16 or #14
Stranded Wire
To 24 VDC Power Source
or
3. Connect communications cabling, refer to Connecting to Devices
section on page 11.
4. Apply voltage and verify the DTAM Micro powerup sequence.