Rockwell Automation 2711-K9A10_K9C10_T9A10_T9C10 DeviceNet Communications User Guide - Manual (Page 7)

7
Publication 2711-6.0.4
Setting up
Communications
using PanelBuilder Setting up DeviceNet communications for an application requires:
• selecting a DeviceNet terminal when creating the application.
• configuring communication parameters for the terminal on the DeviceNet
link.
Selecting a DeviceNet PanelView Terminal
Select a DeviceNet terminal for a PanelView application from:
• New Application dialog when creating a new application or
• Terminal Setup dialog when converting an application initially created for
another terminal.
Any catalog number ending with 10 is a DeviceNet terminal.