Rockwell Automation 2711-K9A10_K9C10_T9A10_T9C10 DeviceNet Communications User Guide - Manual (Page 9)

9
Publication 2711-6.0.4
4. Edit the following parameters:
5. Click OK to exit and return to the Terminal Setup dialog.
Specify To:
Interscan Delay
Provide a delay between scans of the Explicit-Client tags.
Enter a value of 0 to 65535 milliseconds. The default is 500
msec. This time delay is inserted between each full scan of
Explicit-Client tags in the current screen context.
Note: Time delays of less than 500 msec should be carefully
considered since the Explicitly-Client mode will generate low
priority network messaging at this interval.
Bus-off Interrupt
Specify what occurs when a Bus-off Interrupt occurs on the
network:
• Hold in Reset holds the PanelView and waits for
communications to be reset.
• Reset and Continue Communications resets DeviceNet
communications and attempts to re-establish the
communications link (if possible).