Rockwell Automation 2100 CENTERLINE Motor Control Center (MCC) Units with Vertical Operating Handles - Manual

Installation Instructions
CENTERLINE 2100 Motor Control Center (MCC) Units with
Vertical Operating Handles
Catalog Number 2100
About This Publication Use these instructions to install CENTERLINE® 2100 MCC units with vertical
operating handles.
Topic Page
About This Publication 1
Important User Information 2
Before You Begin 3
Recommended Tools 5
Ground the Unit 5
Install the Unit Support Pan 5
Install Swing-out Latch Brackets 8
Install the Unit 8
Install the Door 12
Extend SecureConnect Unit Power Stabs 14
Additional Resources 14
ATTENTION: All covers and doors must be in place before applying power to the
MCC. If units are removed, they must be replaced with the appropriate items
such as units, doors, and unit support pans. If the unit is not replaced, the arc
resistant rating will not apply.