Rockwell Automation 6180 Keypad Configuration Utility Floppy Disk Drivers (for 6180 Industrial Computer - Manual (Page 12)

Keypad Configuration Utility 12
Setting Configuration of Programmable Keys
(96-Key Full Alphanumeric Keypad)
On a full alphanumeric keypad, you can set the default configuration
of the programmable keys to the definitions listed below.
•
Function Keys F1 - F10 and F11 - F20
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
F11 F12 F13 F14 F15 F16 F17 F18 F19 F20
•
Function Keys K1 - K8 and K9 - K16
You can set the configuration for all programmable keys or a
selected group of keys.
To set the default configuration to Function keys:
1. Choose Select All Programmable Keys from the Edit menu
2. Choose Set Default Configuration " Function Keys from the Edit
menu.
The definitions of the programmable keys are updated:
•
F1 - F10 are defined as <F1> – <F10>
•
F11 - F20 are defined as <Left Shift+F1> – <Left Shift+F10>
•
K1 - K8 are defined as <Left Ctrl+F1> – <Left Ctrl+F8>
•
K9 - K16 are defined as <Left Ctrl+Left Shift+F1> – <Left
Ctrl+Left Shift+F8>
Note: These are the factory default settings.
Please note that the key definitions change but the actual keys are not
relabeled.
To view the definition of a key:
•
select the key and choose Key Configuration from the Edit menu.
•
or click the right mouse button on the key and select Key
Configuration from the popup menu.
•
or select Print Preview from the File menu to view all keys.
K1
K2
K3
K4
K5
K6
K7
K8
K9
K10
K11
K12
K13
K14
K15
K16