Rockwell Automation 6180 Keypad Configuration Utility Floppy Disk Drivers (for 6180 Industrial Computer - Manual (Page 18)

Keypad Configuration Utility 18
To redefine the F6 key to perform the RUN RSPROGRAM
<ENTER> command:
1. Select the key labeled F6.
2. Choose Key Configuration from the Edit menu.
3. In the text box, backspace to delete the current definition
4. Under Select Mode, select Macro/String.
5. In the text box, type RUN RSPROGRAM
6. Select Enter from the Add New Code list and click the Enter
button. The nonprintable code is inserted in the Text box.
7. Click OK to store the definition and exit the dialog.
Editing Keypad Preferences
Select Keypad Preferences from the Edit menu to:
•
enable or disable the Ctrl+Alt+Delete function.
If enabled, the keypad recognizes this key sequence as a warm
reset.
If disabled, the Delete key is ignored in the sequence, inhibiting a
warm reset. The default is enabled.
•
enable or disable simultaneous presses of remapped and/or
modifier keys.
If enabled, the keypad recognizes simultaneous key presses of
remapped keys with or without the Ctrl, Alt, or Shift keys.
If disabled, pressing a programmable key inhibits all other key
presses. Pressing a non-programmable Ctrl, Alt, or Shift key
inhibits any program key. The default is disabled.
For earlier firmware versions that do not permit modification, the
dialog is inactive (grayed).