Rockwell Automation 6180 Keypad Configuration Utility Floppy Disk Drivers (for 6180 Industrial Computer - Manual (Page 2)

Keypad Configuration Utility 2
The Keypad Configuration Utility (KIC) allows you to modify, view,
print and download keypad configurations/firmware upgrades to the
following 6180 Industrial Computers.
Catalog Number Computer Type Keypad
6180-xxCxxxxxxxx
6180 Industrial Computer with 10.4 inch Color
Screen Standard
64 Key
6180-xxDxxxxxxxx
6180 Industrial Computer with 10.4 inch
Color, Touch Screen Standard
64 Key
6180-xxExxxxxxxx
6180 Industrial Computer with 11.3 Inch Color
Screen Standard
64 Key
6180-xxFxxxxxxxx
6180 Industrial Computer with 11.3 Inch
Color, Touch Screen Standard
64 Key
6180-xxGxxxxxxxx
6180 Industrial Computer with 10.4 inch Color
Screen Full Alphanumeric
96 Key
6180-xxHxxxxxxxx
6180 Industrial Computer with 15 Inch Color
Screen Standard
70 Key
6180-xxIxxxxxxxx
6180 Industrial Computer with 15 inch Color
Touch Screen Standard
70 Key
For each keypad configuration you can:
•
enable or disable specific keys
•
retrieve, modify and save key codes associated with specific keys
on the computer’s faceplate.
If you modify the default codes and your computer is replaced in the
future, you must either:
•
transfer the old KIC card to the new computer.
•
modify the key codes in the KIC utility on the new computer to
match the existing application. Save the key code definitions to a
Keypad Configuration file (*.key) for later retrieval.
The Keypad Configuration Utility is a 32 bit Microsoft Windows
R
application that runs in these environments:
•
Windows 95
•
Windows NT, version 4.0 or later
Overview
System Requirements