Rockwell Automation 1799-DASCII DeviceNet Serial Interface - Manual (Page 17)

DeviceNet Serial Interface Module 17
Publication 1799-IN012B-EN-P - July 2008
Parameter # Access Description Parameter Choices Default
Setting Default
Value Data
Type
Gateway Consume on DeviceNet Network from Master
Consume
string data
type 22 Get/Set Defines the
format of the
data string
received from the
master. 0 = Array
1 = Short string
2 = String Short
string 1 USINT
Transmit
Swap mode 23 Get/Set If enabled, the
position of the
bytes in the serial
messages is
swapped every 2
or 4 bytes. 0 = Disabled
1 = 16-bit Swap
Enabled
2 = 24-bit Swap
Enabled
3 = 32-bit Swap
Enabled Disabled 0 USINT
Gateway
consume
assembly
size 24 Get Total number of
I/O data bytes
that are received
from the master.
This should be
the TX size of
your scanner. 4…254 20 bytes
of array
data and
4 header
bytes 24 USINT
Parameter # Access Description Parameter
Choices Default
Setting Default
Value Data
Type
Serial Port Transmit/Explicit Messages from EDS Editor
Transmit
data string 25 Get/Set Serial data to be
sent to the serial
transmit buffer. ASCII block data Empty USINT
Transmit
data length 26 Get/Set Length of the
Transmit Serial
Data. 0…250 0 0 USINT