Rockwell Automation 1799-DASCII DeviceNet Serial Interface - Manual (Page 19)

DeviceNet Serial Interface Module 19
Publication 1799-IN012B-EN-P - July 2008
Configuring the Parameters
The 1799 I/O modules have parameters that are configurable through a DeviceNet
configuration tool, such as RSNetWorx for DeviceNet software. The DeviceNet
configuration tools require an electronic data sheet (EDS) for the 1799 I/O modules
to configure the module’s parameters. Find the EDS files at
http://www.rockwellautomation.com/support/.
Set Up the Serial Link
Parameters 1, 2, and 3 let you define the serial link communication options.
See these parameters in the EDS Parameters table on page 12.
14 DeviceNet Handshake Mode 14
15 ASCII Receive Record Number 18
16 ASCII Max Number of Transmit Characters 19
17 ASCII Transmit End Delimiter Mode 20
18 ASCII Transmit End Delimiter Character 21
19 ASCII Consume String Data Type 22
20 ASCII Transmit Swap Mode 23
21 Autobaud 29
Byte Parameter Definition EDS Parameter