Rockwell Automation 2711P-RDKxxx_RDTxxx_RTBxxx LED Display Modules - Manual

Installation Instructions
LED Display Modules
Catalog Numbers 2711P-RDK15C, 2711P-RDT15C, 2711P-RDB15C, 2711P-RDT15AG,
2711P-RDK12C, 2711P-RDK12CK, 2711P-RDT12C, 2711P-RDT12CK, 2711P-RDT12AG,
2711P-RDB12C, 2711P-RDB12CK
About the Product
Display modules with an LED (light-emitting diode) backlight are used by the
PanelView™ Plus 6 and PanelView Plus 700 to 1500 platforms. Earlier displays have a CCFL
(cold-cathode fluorescent lamp) backlight.
Each display module has a catalog number and a series letter. The series letter differentiates an
LED-backlit display from a CCFL-backlit display. You can find the series letter on the back of
the display. Refer to the table to identify the type of display you have.
Topic Page
About the Product 1
Important User Information 2
Replace Display Module 3
Upgrade Firmware 3
Additional Resources 12
IMPORTANT If you replace a 12-inch or 15-inch CCFL display with an LED display, you must upgrade the terminal firmware
for the device to operate correctly.
A firmware upgrade is not required for configured terminals that include a display module and logic module.
The upgrade is required only when ordering an LED display module to replace an existing CCFL display module.
Display Size Cat. Nos. LED Series Displays CCFL Series Displays
15-inch 2711P-RDK15C, 2711P-RDT15C,
2711P-RDB15C, 2711P-RDT15AG Series C Series B or earlier
12-inch 2711P-RDK12C, 2711P-RDK12CK,
2711P-RDT12C,2711P-RDT12CK
2711P-RDT12AG,
2711P-RDB12C,2711P-RDB12CK Series D Series C or earlier