Rockwell Automation 2711P-RDKxxx_RDTxxx_RTBxxx LED Display Modules - Manual (Page 10)

10 LED Display Modules
Rockwell Automation Publication 2711P-IN030A-EN-P - October 2013
6. Navigate to and select the terminal to receive the firmware update.
7. With the terminal selection highlighted, click Next.
8. Follow these steps from this dialog box.
a. Browse to the location of the firmware source files on your computer, where the FUP
was installed.
The default location is shown (E).
b. Choose the version of the upgrade firmware from the pull-down menu (F).
c. Click Next (G).
It can take several seconds for the next dialog box to appear while the FUP is being
retrieved.
IMPORTANT The highlighted selection in the figure below is only for illustration purposes. Your model can be
different.
E
F
G