Rockwell Automation 2711P-RDKxxx_RDTxxx_RTBxxx LED Display Modules - Manual (Page 5)

LED Display Modules 5
Rockwell Automation Publication 2711P-IN030A-EN-P - October 2013
3. Follow these steps from the initial FUW dialog box.
a. Click Create firmware upgrade card (A).
b. Choose the location of the firmware card by browsing to the root directory of the
storage card loaded in your computer (for example, H:\ or B).
The firmware files are copied to this location. You can also specify a folder on the
hard drive.
c. From the Existing terminal type pull-down menu, choose a version v6.00-v7.00
PanelView Plus 6 terminal.
The example shows the firmware upgrade is for a 700 - 1500 PanelView Plus 6
terminal (C).
d. Click Next (D).
A
B
C
D