Rockwell Automation 2711P-RDKxxx_RDTxxx_RTBxxx LED Display Modules User Manual
Page 6
Advertising
![background image](/manuals/580716/6/background.png)
6 LED Display Modules
Rockwell Automation Publication 2711P-IN030A-EN-P - October 2013
4. Follow these steps from this dialog box.
a. Browse to the location of the firmware source files on your computer, where the FUP
was installed (E).
b. From the Upgrade firmware version pull-down menu, choose the firmware revision
for the upgrade (F).
c. Click Next (G).
It can take several seconds for the next dialog box to appear while the FUP is being
retrieved.
5. Follow these steps from this dialog box.
a. Optionally choose the KEPServer drivers you want included in the firmware (H).
b. Click Next (I).
Kepware drivers are already installed on the PanelView Plus 6 terminals.
E
F
G
H
I
Advertising