Rockwell Automation 2711P-RDKxxx_RDTxxx_RTBxxx LED Display Modules - Manual (Page 11)

LED Display Modules 11
Rockwell Automation Publication 2711P-IN030A-EN-P - October 2013
9. From this dialog box, optionally choose the KEPServer drivers you want included in the
firmware, then click Next.
Kepware drivers are already installed on the PanelView Plus 6 terminals.
The final dialog box summarizes your choices for upgrading the terminal firmware.
10. Click Finish to update the firmware in the terminal.
11. Click Yes to continue with the update.
A progress bar updates as firmware files are copied to the terminal.