Rockwell Automation 2711 ControlNet Communications User Guide - Manual (Page 13)

ControlNet Communications 13
Publication 2711-6.10
To download applications through the PanelView ControlNet
port:
➁ Choose Download from the Application menu.
➂ Select the Download parameters.
➃ Application is validated and translated to a .PVA file.
➅ Terminal verifies, resets, and starts application.
➄ PanelBuilder Software and terminal display status of download.
If errors or warnings are detected, the Exceptions dialog opens.
You must correct errors before download can proceed.
➀ Open the application you want to download.
Enter name of .PVA file in which to
save the translated .PBA file
Select Operator Terminal
Select RSLinx
Click OK when done
’TEST.PVA’
Shows ControlNet
driver is active
Setup button is
active if more than
one terminal is
available.
Note: If a download is aborted (by the user or by a communications
error), no application is saved and ControlNet communication
settings are set to defaults (Node =3, Interscan Delay = 100 msec).