Rockwell Automation 2711 ControlNet Communications User Guide - Manual (Page 7)

ControlNet Communications 7
Publication 2711-6.10
Serial Number
Read only field that displays the 32 bit serial number of the
PanelView. The serial number is unique for each ControlNet device.
Channel Status
Read only field that displays the current status of redundant channels
A and B as a value. Refer to page 15 for definitions of each
displayed value.
Comms Status
Message display containing the current status of the communication
card. “Connected” is displayed when the PanelView is connected to
the network and properly operating. Pages 16 & 17 list the terminal
messages related to ControlNet communications.
Restart Terminal [F1]
Performs a re-boot of the terminal. A new node address takes effect
after a reset.
Exit [F10] or [F16]
Returns to the main Configuration Mode menu.