Setting up communications using panelbuilder – Rockwell Automation 2711 ControlNet Communications User Guide User Manual
Page 9
Advertising
![background image](/manuals/580722/9/background.png)
ControlNet Communications
9
Publication 2711-6.10
Creating a ControlNet application includes:
1. Selecting a ControlNet terminal when creating the application.
2. Configuring ControlNet communication parameters for the
terminal.
Selecting a ControlNet PanelView Terminal
Select a ControlNet terminal for a PanelView application from:
•
New Application dialog when creating a new application
•
Terminal Setup dialog when converting an application created for
another terminal.
Any catalog number ending with 15 (2711-xx15) is a ControlNet
terminal.
Catalog numbers with 15 at the end
indicates a terminal with a ControlNet port.
Setting up
Communications
using PanelBuilder
Advertising