Rockwell Automation AutoMax Enhanced Ladder Language Reference Manual - Manual (Page 183)

9Ć9
9.2.2 Output Parameters for the Circular Rotate Bits Left Instruction
This table lists the outputs for the ROL instruction and the variable type and data
type/range that each output supports. To use them, connect them to a contact, coil, or
Boolean input of another instruction.
Parameter Description
ENO Use this output as the input to another instruction for
easily chaining multiple instructions. This output follows
the state of EN unless an error occurs.
OUT This output reflects the state of the least significant bit of
In following the rotate operation.