Rockwell Automation AutoMax Enhanced Ladder Language Reference Manual - Manual (Page 256)

12Ć4
Parameter Data/Type Range Variable Type Description
Address Enter the address of the location that contains the data
you want to read. Use this input when you must read a
byte from an odd" address. If you enter an address, the
slot input is ignored.
You must calculate the address using this information.
D For a module that follows AutoMax conventions,
choose the base address based on the slot that the
module occupies and add an offset equal to the
register * 2. See Listing of Base Addresses for Each
Slot in the AutoMax Chassis," section 12.3.
D For a nonĆReliance module, choose the address that
corresponds to the location of the information on the
module.
D simple
D constant
D element of an array integer or double
integer (0240000 to
2FFFFH)
Option Define the amount of I/O data you want to read by
entering an option number that corresponds to the
amount of data you want. See Defining the Amount of I/O
Data to Read.
integer (1 to 4)