Rockwell Automation 6181F_P Series E Integrated Display Computers Installation Instructions - Manual (Page 21)

Industrial Integrated Display Computers 21
Rockwell Automation Publication 6181P-IN010F-EN-P - July 2013
If your computer does not display the correct time and date, replace the battery.
Ship or Transport the Computer
If you need to ship the computer via common carrier or otherwise transport it to another
location, you must first uninstall the computer and place it in its original packing material.
ATTENTION: Replace the battery with a specially-packaged replacement part from Allen-Bradley.
Use of another battery may present a risk of fire or explosion.
At the end of its life, the used battery should be collected separately from any unsorted
municipal waste and recycled.
ATTENTION: A risk of fire and chemical burn exists if the battery is not handled properly:
•
Do not disassemble, crush, puncture, or short external contacts.
•
Do not expose the battery to temperatures higher than 85 °C (185 °F).
•
Do not dispose of a used battery in water or fire.
For safety information on handling lithium batteries, see Guidelines for Handling Lithium
Batteries, publication
AG-5.4 .
IMPORTANT Replacing the battery results in all BIOS settings returning to their default settings. BIOS
settings other than default must be reconfigured after replacing the battery.
ATTENTION: Do not ship or transport the computer when it is installed in a machine, panel, or
rack. Doing so can cause damage to the computer.
You must uninstall the computer and place it in its original packing material before shipping.
Rockwell Automation is not responsible for damage incurred to a computer that is shipped or
transported while installed in a machine, panel, or rack.