Rockwell Automation 6181F_P Series E Integrated Display Computers Installation Instructions - Manual (Page 8)

8 Industrial Integrated Display Computers
Rockwell Automation Publication 6181P-IN010F-EN-P - July 2013
•
When mounted, the computer cannot be tilted more than 60° from vertical.
Mounting Clearances
IMPORTANT Because of self-heating, do not operate the computer in an enclosure using minimum
clearances unless adequate ventilation or other cooling methods are used to lower the
temperature within the enclosure.
≤60°
from Vertical ≤60°
from Vertical
Right and left are based on facing the front of the computer.
Item Description Value
1 Top 50 mm (2 in.)
2 Left (for airflow) 50 mm (2 in.)
3 Back 50 mm (2 in.)
4 Right (for airflow and drive access) 127 mm (5 in.)
5 Bottom (for I/O port access and ventilation) 102 mm (4 in.)
2
1
3
4
5