Redipanel operation, Connections – Rockwell Automation 2705-APG RediPanel Plug and Go Products User Manual
Page 13
Advertising
Bulletin 2705
RediPANEL 800A Push Button Modules
User Manual
13
Connections
RediPANEL modules connect to Allen-Bradley 1746 or 1771 I/O modules
with two preassembled cables. This replaces large wire bundles used in
hardwired implementation. See Figure 8.
Figure 8
Typical RediPANEL I/O Module connection
•
•
•
•
•
•
•
•
•
•
•
•
I/O Modules
2705 RediPANEL
Push Button Panel
Output Cable
Input Cable
Bulletin 800A devices in the RediPANEL module “appear” to the
programmable controller as though they were hardwired to I/O modules in an
I/O rack. No special instructions are required since the push button, lamp,
and switch selection are programmed as discrete I/O devices using the input
and output image tables of the programmable controller.
RediPANEL Operation
Advertising