Rockwell Automation 2705-APG RediPanel Plug and Go Products - Manual (Page 4)

Bulletin 2705
RediPANEL 800A Push Button Modules
User Manual
4
Bulletin 2705 RediPANEL Modules with Bulletin 800A Push Buttons are
fully assembled 16 and 32 point push button stations that operate with high
density Allen-Bradley PLC and SLC I/O modules. The only wiring required
is a pair of cables and power supply connections, which eliminates costly
hardwiring and provides fast installation and start-up.
Unless otherwise indicated, the descriptions that follow apply to both push
button stations and both I/O modules.
Standard stations include 16 or 32 normally open (N.O.) illuminated push
buttons. LED’s are used for illumination. The industrial 800A version is
suitable for NEMA 13 oil/dust tight industrial enviornments.
RediPANEL 800A Modules can also be ordered as custom models which
consist of the RediPANEL front plate and all the necessary push button
wiring connectors.
These custom Push Button stations can include any of the following
Allen-Bradley Bulletin 800A devices:
D Momentary illuminated or non-illuminated push buttons
D Flush or extended head operators
D Two position non-illuminated selector switches
Description