Rockwell Automation 2706-P_P InView Quick Start - Manual (Page 12)

Publication 2706-QS001D-EN-P - January 2009
12 InView Marquee Message Display
Configure Communication
Follow these steps to configure the communication.
From an existing project, start at the main page of the InView
Messaging software.
1. Right-click the display you wish to modify and choose Edit
Display.
2. In the Edit Display dialog box, click the Communications tab
and choose Industrial Network Comms as your Download
Protocol.
3. At the bottom of the dialog box, in the Industrial Network
Communications settings, click Configure Communications.