Rockwell Automation 2706-P_P InView Quick Start - Manual (Page 19)

Publication 2706-QS001D-EN-P - January 2009
InView Marquee Message Display 19
Equipment Setup
Follow these instructions to connect the 2706-PENET1 communication
module for downloading.
•
Connect the power to the unit and RS-232 cable as shown.
•
Connect the Ethernet cable to the communication module.
TIP
TCP/IP is not available for catalog number 2706-P22R. An external
2706-PENET1 module is not required for catalog number 2706-P9x.
Record the MAC address in catalog number 2706-PENET1 before
installing a display or communication module. The MAC address can
be found on the label near the 2706-PENET1 module.
TIP
Verify RSLinx software is not using the serial port.