Rockwell Automation 2706-P_P InView Quick Start - Manual (Page 14)

Publication 2706-QS001D-EN-P - January 2009
14 InView Marquee Message Display
8. In the EtherNet/IP Configuration dialog box, uncheck both
DHCP/BootP Enable and DNS Enable.
9. Enter the IP Address for your communication module and the
required Subnet Mask and click Next.
10. In Tag Setup, configure your tags, as required by your
application, then click Next.
TIP
The node address of the controller and the IP address of the message
display must be unique in the fourth entry, for example, 192.168.1.100
and 192.168.1.120. Leave the Gateway Address blank unless required
for your application.