Rockwell Automation 9220-TG QUICK START CONTROLNET MESSAGE - Manual (Page 18)

ControlNet Message/Traffic Generator Tool 18
Publication 9220-10.1 — July 1996
Running a Separate DOS Program
To run a separate
DOS program from
You
the Modules drop-down menu edit CNXOR.CFG to define your tests. These tests then appear
in the cascading menu that lists the tests. See the figure below
and page 29.
the DOS prompt
a. choose File, DOS Shell
b. run the program:
program.exe
Taking the Card Offline
From Setup, Choose Offline.
Exiting the Tool
To Choose
exit to a DOS prompt for viewing and editing
configuration files (e.g., CNXOR.CFG) File, DOS Shell
exit the program and take the card offline
without closing open connections File, Exit