Rockwell Automation T80020 Application Note Diagnostic Procedures - Manual

Trusted TM
AN-T80020
Issue 12 Feb 11 AN-T80020 1
Application Note
Diagnostics Procedure
This document provides:
• A procedure for first-line diagnostics
This explains how to gather the appropriate data for each situation. It is easy to lose evidence after a
module or system failure. This procedure explains how to collect the evidence to give to a support
engineer, who can use the rest of this document to diagnose the problem.
• Details of all error codes produced by the I/O modules
For I/O module faults, the first-line diagnostics will usually provide a fault code. This section explains
the fault that has been found and advises on a course of action.
• A guide to the Analysis Tool
The Analysis Tool is a program which helps with the collection and analysis of diagnostic data from the
system. It includes advice on all the error codes and will warn about problems found on the system.
For technical support email: [email protected]
Issue Record
Issue
Number Date Revised by Technical
Check Authorised
by Modification
6 March
09 Nick Owens Pete Stock Gerry Creech Derived from 552936 rev 05.
Fault codes revised, converted
to AN, advice rewritten.
7 May 09 Nick Owens Pete Stock Gerry Creech Added action on processor
shutdown
8 July 09 Nick Owens Andy Holgate Pete Stock Revised Analysis Tool manual
9 Jan 10 Nick Owens Andy Holgate Pete Stock Revised Analysis Tool manual
10 May 10 Nick Owens Andy Holgate Pete Stock Analysis Tool v3.6 manual
11 Oct 10 Nick Owens Andy Holgate Pete Stock Analysis Tool v4.0 manual
12 Feb 11 Nick Owens Andy Holgate Pete Stock Analysis Tool v4.1 manual