Rockwell Automation T80020 Application Note Diagnostic Procedures - Manual (Page 23)

Trusted TM
AN-T80020 Diagnostics Procedure
Issue 12 Feb 11 AN-T80020 23
Each I/O module has up to seven reports. Left-click on the module for the main report. This provides
serial numbers, versions and the error codes currently reported on each module. These are the same
error codes as found through the Toolset Diagnostics.
Right clicking provides the system event logs on each slice (if the file includes them), and two or three
data reports. The system event logs include a lot of data, so the main events have been extracted for
the report.
Hold the mouse pointer over a row in the table to get some advice on an event. All faults with fault
codes have advice for further diagnostics and remedy. This is taken from the advice in the Error Codes
Descriptions in Appendix A of this document, and includes all its maintenance advice.